CMT PT 6,5 - 7,0 mtr containere Transfer

Basic

Registration

Tyres

Brakes

Weight

Coupling

Dimensions

Suspension

Chassis

Tippers

Description

CMT 3-axle demountable-body trailer with 3-way tipping – for 6500 to 7000 mm containers

6400 mm flatbed section – 300 mm to the center of the innermost container roller position (plus an additional 100 mm extension); the fork section can be extended by approx. 250 mm, and the extendable bumper can be pulled out by 300 mm, allowing for adjustment of the rear overhang.

2 x 2 external container locks + 2 internal container locks.

Capable of loading containers from the rear; there is 4950 mm of space to the container roller wheel well on the roller track, with 1500 mm from that point to the front edge of the loading bed.

Manual extension at the rear (bumper) by 300 mm – currently untested as it has not been used for some time.

Toolbox.

Adjustable drawbar; currently 1900 mm from the front edge. Coupling length is currently 8400 mm (+ 4); this can be reduced by 300 mm or extended accordingly. Coupling height is 750 mm (adjustable down to 650 mm). 57 mm towing eye.

BPW 9000 kg axles – drum brakes – air suspension with raise/lower valves.

Lift axle on the 2nd axle; long-wheelbase bogie with 1500 mm spacing between the 2nd and 3rd axles.

265/70R19.5 tires in very good condition.

2 LED reversing lights + work lights under the bed near the 1st axle + 2 additional lights. Rear – LED taillights

Grey chassis frame, in good condition for its age.

Delivered with a fresh inspection (MOT) and fully serviced—including a new air bellows, air tank, and new bolts/bushings for the drawbar; the undercarriage, tipping cylinder, and fifth wheel/turntable have been lubricated.

Contact Scanvo at +45 87244370 or via email at salg@scanvo.dk.

Always a large selection of late-model transport equipment—as well as a wide range of new and used hooklift containers. See more at www.scanvo.dk.